The safety instructions can alternatively be downloaded at https://broncolor.swiss/safety

 

• The device may only be operated by qualified personnel who have read and understood these operating instructions completely. 
• Keep children away from the equipment, even under supervision! 
• In case there are children in the photographic environment, they must be continuously supervised and access to the equipment must be blocked! 
• Please use only broncolor original equipment and original spare parts. Any warranty claims shall be rejected when operating non-broncolor equipment.  
• The device must be operated in a dry environment (relative humidity: max. 80%, non-condensing) and at an ambient temperature of 0°C to 35°C (usage) or -10°C to 50°C (storage).
• Only use at altitude not exceeding 2000m.
• Only use in not-tropical climate regions.
• Protect the device from direct sunlight at high operating temperatures and adjust it to ambient conditions (warm up or let it cool down) before commissioning.
• The surface must be leveled and ensure a firm base for the device.
• The air vents of the device must not be covered. 
• Prior to each operation, the device must be checked for damage and contamination.
• The cable must be protected against tripping, stepping on and rolling over. In addition, protect them from mechanical exposure and against jamming. 
• Never pull the device by the cable. 
• Never reach into the slide-in slots or insert anything other than the original slide-in batteries. 
• The device must be taken out of service before cleaning if the slide-in slot is dirty or clogged.
• There must be no free-roaming animals at the installation site. 
• Allow the unit to cool down before packing it for transport or storage.
   

This product complies with the safety requirements of EU Directive 2014/30/EU on the harmonization of legal provisions governing electromagnetic compatibility in the EU member states and complies with the limit values of EN 55022/EN 55032 Class A.