Menu navigation - Siros S
-
Satos
Safety Instructions – read before use | Environment Firmware update Satos User Interface | Controls | Functions | Handling Technical Data Remote control | Flash triggering Power supply | Battery Maintenance | Repair | Consumables | Spare parts | Guarantee Accessories Charging station for up to 4 slide-in batteries
- Pulso L
- Siros S
- Siros L
- Scoro E + S
- Move 1200 L
- RFS 2.1
- RFS 2.2
- Pulso G, Unilite and Picolite
- LED F160
- Scope D50
- Compatibility (Lamp <-> light shaper | Lamp <-> power pack)
- Locate your distributor or dealer
Table of Contents
Overview of menu functions
Siros 400 S / 800 S WiFi / RFS 2 |
|
| speed | x |
| WiFi | x |
| HS | x (800 S only) |
| st / ch | x |
| lamp | x |
| seq | x |
| beep | x |
| sync | x |
After pressing the rotary controller, you enter the main menu of the monolight. From there you have access to the various functions.
Please note:
If a menu item cannot be selected, the unit does not support this function!
Example: Set a sequence of 15 flashes per release
1) Press the rotary controller to enter the main menu. The menu item last selected will be displayed. The main display changes from
showing the output power to the selected menu item.
2) Turn the rotary controller until you reach the menu item "seq".
3) Press the rotary controller, to confirm this function. The "seq" display begins to blink.
4) Turn the rotary controller until "15" appears in the main display.
5) Confirm this selection by pressing the rotary controller. After this confirmation, the unit switches to its normal state. If the
selection is not confirmed within 5 s, the unit switches to its normal state without changing its setting.
1)
2)
3)
4)
5)
