bronControl app and WiFi settings
-
Satos
Safety Instructions – read before use | Environment Firmware update Satos User Interface | Controls | Functions | Handling Technical Data Remote control | Flash triggering Power supply | Battery Maintenance | Repair | Consumables | Spare parts | Guarantee Accessories Charging station for up to 4 slide-in batteries
- Pulso L
- Siros S
- Siros L
- Scoro E + S
- Move 1200 L
- RFS 2.1
- RFS 2.2
- Pulso G, Unilite and Picolite
- LED F160
- Scope D50
- Compatibility (Lamp <-> light shaper | Lamp <-> power pack)
- Locate your distributor or dealer
To control your Siros L monolight, you can also download the “bronControl” app free of charge. To find the app, search for “bronControl” in Apple’s App Store, or in Google’s Play Store.
Operating modes:
- Operation in "private" mode (works setting)
If the WiFi mode is activated on more than one monolight, these units all link up automatically with the same studio address to form a private network. A smartphone or tablet must then be connected to this network in order to control it. To use this, activate the WiFi function on your smartphone or tablet. Your device will then automatically search for available WiFi networks. Connect your smartphone or tablet to the appropriate Bron-Studio network.
The connection password is: bronControl.
Now start the bronControl app on your device. Add the appropriate studio number under “add new studio” and connect the app with this studio. For further instructions about operation, please use the help function “?” in the app.
- Operation in "enterprise" mode
If there is an existing WiFi network (router), the unit can be integrated into this network using a smartphone or tablet. To achieve this, in the “bronControl” app, under settings, go to “Network Settings” and enter your router’s settings in “enterprise” mode. Make sure the units are set to the correct studio address. Siros saves the last type of connection and tries to connect to the last network the next time it starts.
Menu settings
on / off / sync (on / -- / sy)
| on | WiFi module is activated. The unit tries to connect to a network |
| -- | WiFi module is deactivated |
| sy | When “sy” is selected, the unit reverts to a “private” mode. This means that the unit looses its network setting and connects to the private network |
WiFi display on unit
| Symbol | Description |
| Dark | WiFi is not activated |
| Blinking | WiFi is activated, but not connected to a network |
| Permanently on blue | WiFi is activated and connected to a Siros L network (private) |
| Permanently on violet | WiFi is activated and connected to an existing network (enterprise) |
Cognition light
When the various lamp channels are selected (zones), the cognition light on the top surface of the unit changes colour. The purpose of this is to better differentiate between individual units when they are controlled by the “bronControl” app.
The light on the unit changes colour when the app is activated on a smartphone or tablet, or when the rotary controller on the unit is pressed; it changes back to blue on leaving the menu.
The lamp channel colours are as follows:
Lamp channel 1 blue
Lamp channel 2 green
Lamp channel 3 violet
Lamp channel 4 yellow
Lamp channel 5 turquoise
From lamp channel 6, the colours repeat in the same order (starting with blue).