The following illustrations familiarize you with the controls of the Pulso L lamp:
Number |
Function |
1 |
Protecting glass |
2 |
broncolor Pulso bayonet |
3 |
Locking slide |
4 |
Cognition light The cognition light serves the purpose to more easily distinguish individual lamps (with the use of LED colors). You will find a complete explanation in the chapter THE SUBMENU: DETAILED DESCRIPTION in Flash Mode |
5 |
Manual focusing wheel
|
6 |
Umbrella bracket Maximum insertable pole diameter: 8mm (0.31in). |
7 |
Wing screw |
8 |
Handle |
9 |
Clamping lever |
10 |
Tripod mount |
1 |
Display |
2 |
Button "mod" A long button press (only in "Flash Mode") results in the modeling light changing to the highest level ("full"), provided the current selection is "low" or "prop" (proportional to the flash energy). With a renewed quick button press, the current selection becomes active again. |
3 |
Press/Rotary control This control enables navigation on the display and is used to configure the Pulso L. |
4 |
Button "test" This button is without functionality in the continuous light mode ("Cont.") and is also not backlit.
When the "test" button is pressed on the Satos generator, all connected Pulso L lamps trigger a flash. |
5 |
Micro-USB interface For service purposes only |