Number

Function

1

LAN socket (Local Area Network)

Satos must not be powered via PoE (Power over Ethernet).

• Only shielded Ethernet cables should be used. 
• The Ethernet cable should be earthed at both ends. This is achieved by connecting the mains cable to the Satos and plugging it into an appropriately earthed socket. The Ethernet equipment used by the customer (router, switch, etc.) should be earthed.
• The maximum permissible cable length is 100m
• An Ethernet cable connected directly to the Satos must not leave the building.

2

USB 2.0 Type A port:
It is used to import firmware update files.

Please note:
This USB port is for communication only and is not designed to charge or power other devices.

3

Synchronous socket: It is used for flash triggering using a synchronous cable. The synchronous cables (Item No. 34.111.00; 5m) and (Item No. 34.112.00; 10m) can be connected to the synchronous socket for triggering by cable.

4

Photoelectric cell: Enables flash triggering by light pulse. You can adjust the photocell sensitivity in the "Sync" submenu. Also, this function can be deactivated there.