Number

Function

1

Protecting glass

2

broncolor Pulso bayonet

3

Locking slide
By fixing it in the rearmost position, you have both hands free to remove or replace the light shaper in a safe and controlled manner.

4

Cognition light

The cognition light serves the purpose to more easily distinguish individual lamps (with the use of LED colors). You will find a complete explanation in the chapter THE SUBMENU: DETAILED DESCRIPTION in Flash Mode 

5

Manual focusing wheel

The position of the flash tube or the LED module in the light shaper can be infinitely varied manually ("spot" ß à "flood"). A numeric scale simplifies recording of certain positions or achieving exactly the same focusing on numerous Pulso L lamps.

6

Umbrella bracket Maximum insertable pole diameter: 8mm (0.31in).

7

Wing screw 
For secure locking of the Pulso L while using a tripod.

8

Handle

9

Clamping lever 
Secures the Pulso L lamp on the desired angle while using a tripod.

10

Tripod mount
For bolts 12mm (0.47 in), 3/8" thread and bolts 16mm (0.63 in)

1

Display
OLED 1.69 inch

2

Button "mod" 
The LED modeling light switches itself on or off with a quick button press.

A long button press (only in "Flash Mode") results in the modeling light changing to the highest level ("full"), provided the current selection is "low" or "prop" (proportional to the flash energy). With a renewed quick button press, the current selection becomes active again.

3

Press/Rotary control

This control enables navigation on the display and is used to configure the Pulso L.

4

Button "test"
This function is only available when the Pulso L is used in Flash Mode. A quick button press triggers a flash from the corresponding lamp. Any special functions ("Sequence", "Delay", "Alternate") are ignored. This means that exactly one flash is always triggered immediately per button press.

This button is without functionality in the continuous light mode ("Cont.") and is also not backlit.

When the "test" button is pressed on the Satos generator, all connected Pulso L lamps trigger a flash.

5

Micro-USB interface

For service purposes only