Release - Move 1200 L

+ More

RFS 2 interface (Radio Frequency System)
Move power packs are supplied with RFS 2 installed as standard.
For RFS 2 flash control, the channel (studio address) must correspond to the transceiver’s RFS 2
channel. The channel (studio address) is defined in the LCD display under "studio address".

With the RFS 2 transceiver you can define and adjust the individual lamp connections on the flash
units as you wish. To make the adjustments, please follow the procedure given in the operating
instructions for the RFS 2 transceiver.

The RFS 2 transceiver is not included in the power pack’s scope of supply.
Photocell (cell)
The photocell can be switched on and off using the "sync" key. When it is active, the blue LED
beside the "cell" label is illuminated.

After the first flash of a sequence, the active photocell is deactivated, and the blue LED beside the
"sync" key blinks. Pressing the "sync" key switches on the photocell again.
Sync socket
The sync cables, 5 m (16.4 ft) (art. no. 34.111.00) and 10 m (32.8 ft) (34.112.00), can be fitted to the
sync socket for cable release.
"test" key
This key is used for manual release. A flash can be triggered as soon as 70 % of the set energy
level is reached. The visual ready indicator, on the other hand, only illuminates when 100 % is
attained.

relocate discharge